R710 hangs with idrac console unresponsive
My company has 4 Dell R710's all running RHEL 5.5 and Oracle 11gR2. In the last 2 weeks we have had 2 of the servers hang with NO indication from RH or Oracle that their was any kind of kernel panic or...
View ArticleM1000e CMC redundancy is lost, brand new enclosure
I have a brand new enclosure running firmware 5.11. The primary CMC works, but has a number of issues-connections to at least two M630 DRACS show as timing out-connection to the secondary CMC shows as...
View ArticleDell R520 Power Supply
Hi,I have 2-R520 both with single PS and I would to know if it's possible to replace it with RPS? Is there an adapter needed to convert to dual PS? Any feedback is appreciated. Thanks
View ArticlePoweredge T710 Raid Controller
Good Afternoon Dell Support. I have a quick question on a T710 supported raid controllers, we are looking to replace the current PERC 6/I (Part # T954J) controller due to it failing with T774H which is...
View ArticleT20 wireless USB lockups
I have a PowerEdge T20 that that freezes whenever I connect to a wireless network. A wired connection is fine. I have tried a clean install of both WIndows 7 and 10. Tried two different brands of...
View ArticleDell R610 After ungracefully poweroff won't power on
Hi there,i've a Dell R610 out of warranty that today after a ungracefully poweroff won't power on.I've already disconnect memory banks ,battery ,power cord ,psu ,swapped power cord and psu with another...
View Articleservers needed
Hello, My needs are small, just need Dual Core, RAM:4GB, windows 2008 r2 +, 500GB SATA,100Mbps And decent network uptime Location: United States I don't run any website, database, just a place to run...
View ArticleHow to open a service Request / Ticket / Issue
Hi all,I'm now searching for some time how to open a Service Request or Ticket for some iDRAC issues I found.How can I submit these?Regards,UBruns
View Articleapply bundles.sh is invalid
I've found older posts on this issue but 2+ years is a bit out of date. Is the solution to this issue to locate a pervious version of the tool and rebuild the iso? And yes i just did a full update...
View ArticlePoweredge 2900 Unexpected Reboot
Hello,We have a 7 1/2 year old Poweredge 2900 that has rebooted itself 4 times in the last week at random. None of these were close to when WSUS reboots to apply updates and nothing in Task Scheduler...
View ArticleClik here to view.
Poweredge T110 II - PERC S300 controller showing degraded
I have a Poweredge T110 II with a PERC S300 RAID controller. The OpenManage Server Administrator shows the logical drive degraded but the physical drives all show good. The Windows event logs show...
View ArticleR520: vFlash initialization resulted in iDRAC7 failure
Hi,this topic continues the case started at (http://en.community.dell.com/support-forums/servers/f/956/t/19681047)Seeking for a way to make the XEON E5 2440 v.1 CPU temperature become monitored through...
View ArticleT110 Mk2 Amber flashing LED on front panel
Can anyone tell me what could be the cause of an amber flashing light on the front panel please, and what I should do about it. Functions all seem fine, but it must mean something is amiss, and I can't...
View ArticleRenesas USB 3.x on PowerEdge R310
I have Renesas based PCIe USB 3.x controllers (PCI\VEN_1033&DEV_0194&SUBSYS_00000000&REV_04) in few R510 running Server 2012 R2 with NO issues.USB3 speed to write/read. All good. Using...
View ArticleR630 (1.3.6) kernel bug
We saw this in our syslogs recently and was curious to know if this was a known issue.Apr 13 17:14:42 hv5 kernel: [10485687.112290] huge_memory: mapcount 0 page_mapcount 1Apr 13 17:14:42 hv5 kernel:...
View ArticleTrying to figure out the details of the PCIe bus in the R630
Hi,I primarily work with NICs using the R630 with two processors. I have been trying to figure out how the PCIe bus is connected to the two sockets but the details seem to elude me.As stated in the...
View ArticleDell QLogic 57810 Dual Port 10 Gigabit SFP+ Server Adapter
Hi All,Regarding the "Dell QLogic 57810 Dual Port 10 Gigabit SFP+", is it compatible with LR (single mode)? If so, can anyone direct me to a compatible SFP+ LR transceiver?Thanks,Adi.
View ArticlePowerEdge T310 MEMBIST Failure
Have a T310 Server with (4) 1GB DDR3 1066 1r sticks. These are the original sticks since purchase.I have started to get BIOS dropping two of the four sticks with a MAMBIST Failure A2 and MAMBIST...
View Articlemax payload size R730
Hi everybody,i am trying to find any info regarding "max payload size" paramerter for R730."lspci-vvv" command returns a value of 256, however there is no info in the technical docs.
View ArticleT610 random I/O locks - Need chipset drivers
Have a T610 w/ 2 Xeon E5606, 48GB ram, perc 6/i raid 10 with 6 146GB 15K SAS drives. Just clean installed Server 2012 R2. Having random I/O locks where nothing will happen between 5-40 seconds. No...
View Article