Factory Reset Dell Poweredge?
Recently my boss gave me two Dell Poweredge 2950's and a 1950. All three come with VMware installed on them which unfortunately neither of us know/remember the password for. Would anyone know of a...
View ArticleR720 PCIe training error: system halted
Hello,I have an R720 dell server. As I am booting the server, after initializing the iDRAC it is giving me an error PCIe training error: system halted and it is not letting me do anything after this,...
View ArticlePCI Slots enumeration on Dell servers
Hey Guys,I'm working with Dell PowerEdge R730 and see in the back of the server 7 PCI slots numbered 1-7.I try to map my PCI devices to the slot they are attached to. lspci command gives physical slot...
View ArticleDell T110 II does not power on
I have a Dell T110 II server that was working, but it no longer powers up since it was moved. When it is plugged in, it tries to start up for a second, then shuts down for a second or two, then tries...
View ArticlePowerEdge C6145 BMC critical condition event in Power On mode S0/S1
I have a PowerEdge C6145 that went off warranttee last Nov. We had a power outage about a week ago and our UPS failed. The PowerEdge C6145 seemed okay when the power cam back, but now it is blinking...
View Articleneed to change service tag on dell poweredge T110ii server.
recently i replaced main board on dell poweredge T110ii server and now need to change that service tag.
View ArticlePoweredge R710 turned off but all status LED lights in backplane are lit.
I was hoping to maybe find some answers here but my poweredge R710 has just recently or at least I just noticed that the status lights in the drive's back plane are all lit. This is the 8 - 2.5 drives...
View ArticleThe differences among Fedora, RedHat, CentOS and other Linux based OS？
The differences among Fedora, RedHat, CentOS and other Linux based OS？What server do you use for your business? I am confused with various solution's available. The differences among Fedora, RedHat,...
View ArticleiPXE over IPv6
Hi,1. I am currently using 5 Dell PowerEdge R720xd server (Processor : Intel Xenon) to setup cluster nodes from my Main server which have DHCP server (IPv6 only), complete pxe setup for pxe boot of all...
View ArticleUnlock Advanced Settings for InsydeH20 Bios
Hello World,I'm not the type to post but I admit I'm in desperation mode. I'm reaching out for some help on something that I’m getting stuck with.Here’s a quick rundown.1U PowerEdge R210 IIWindows 7...
View ArticlePoweredge T100 Peculiar Issue
Hi All, I have a Dell Poweredge T100, from past few days I am facing a peculiar Issue on this server I.E If I connect the Server in the Server room with Room Temperature of 18"-24" the server is...
View ArticleAllow FC830 in FX2 chassis access FD332 storage located in another FX2
Hello, Hope this is the correct forum. Here is our setup. We have one FX2 that has a FC630 running in it and a FD332 that it is using as its datastore. We have another FX2 that has a FC830 in it that...
View ArticleTool to see what Server Types specific RAM fits into?
Community,I have some 4Rx4 PC3 8500R 7-10-F0 240 pin RAM. Is there a tool anywhere I can type this info into and results would display what PowerEdge Servers it could be installed in?Or, if anyone...
View ArticlePoweredge R320 processor compatibility
Our 'old' PER320 (rackmount) is "severely over-taxed" since it still has the 'stock' E5-2407 2.2GHz quad-core XEON processor installed. As it stands right now, the owners are a tad reluctant to...
View Article32GB usable out of 92Gb in PowerEdge r720
Hello, am using server PowerEdge r720 with dual cpu running, I have upgraded from 16GB the RAM up to 92GB, but unfortunately its only 32 is usable, I have tried to change the slots but still the same...
View ArticlePowerEdge T630 " Missing GPU installation kit "
Hi,We've received finally the T630 P.EDGE Server.But during the ordering process, our Dell Reseller forget about the GPU installation Kit, necessary to power our 3 Titan X GPUs. (we have already 2x...
View ArticleDELL R910 - E1234 Memory Riser G Power Failure
Hi,We have a DELL R910 server (Service Tag:<ADMIN NOTE: Service tag removed per privacy policy>) and have read some articles here about the problem "E1234 Memory Riser Power Failure" . We have...
View ArticleiDRAC6 SSL certificate upload failing
Hello,On a Poweredge R610 with iDRAC6 v. 1.97 (Build 02), I export the CSR via the webgui :myServer.csrThen on the server that manages our own CA, using easy-rsa, I have copied this csr into the...
View ArticlePowerEdge T105 -- failed bench build
We're a nonprofit with very limited budget and we have a working PowerEdge T105 server. We'd like to protect it by acquiring a full set of spare parts. I bought a motherboard (0D682C), an AMD Opteron...
View ArticleHow to tell which OS Nic is which physical port?
Howdy,I know I found info on this a couple weeks ago but can't find it today. We have some various D430s, R620s, etc. They all have four 1 gig NIC ports on the back. Is there a way to tell which NIC...
View Article