Memory Question about PowerEdge T310
Hello,I'm running a PowerEdge T310 and was wondering if this:http://www.amazon.com/Corsair-Vengeance-Desktop-Memory-CMZ32GX3M4X1600C10/dp/tech-data/B0068ZWZY0/ref=de_a_smtdis compatible to run on it? I...
View ArticlePoweredge RAID battery.
I'm wondering if anyone can help me with this. You see, I've got some spare batteries, part number G3399. I know Lithium Ion batteries have a shelf life of just a few years, and my question is, where...
View ArticleR710 Fans on High
Lost power over the weekend, long enough to drain the UPS that protects the server.The UPS basically pulled the plug on the server. When it rebooted, it did not boot. On the console was"iDRAC6...
View ArticleClik here to view.
1950 Battery Status
Hi - we have a PE1950, approximately 4 years old, with a DRAC5 card installed. In the DRAC interface, the batteries both show as 'good' (see screengrab). We also monitor this server with BMC Portal,...
View ArticleDell Tower 1920W UPS T610 Server
I have a T610 Server protected by a Dell Tower 1920W UPS. It first had a 'Service Battery' new batteries were installed, now it has 'Charger Failure'. Documentation states it may be caused by one of...
View ArticleServer armageddon?
I am looking for input on how the following will impact server purchases over the next 5 years:1. Will server virtualization reduce the number of servers needed by users?2. Will micro-server technology...
View ArticleGeneral Ghetto Modification Questions
Yo. Picking up a Poweredge 2950 II soon to use as a full-time media server and a part-time minecraft server. Just a couple of questions, and i've never owned or used anything like this before, so...
View ArticleDoes Dell PowerEdge T105 support EVGA Geforce 6200 256MB DDR2 NVidia PCI E...
Hi,Does my PC (DELL PowerEdge T105) support the VGA card (EVGA Geforce 6200 256MB DDR2 NVidia PCI E Graphics Card (256-P1-N399-LX))?Please help me out.--Thanks,Balu C.
View Articlepoweredge 850 front panel amber light
I have a blinking amber light......what does it mean?Where can I get a user and service manual? If you say dell, please provide link......since I can't find oneThanks
View ArticleDRAC 5 Virtual Media Problems
I recently purchased a Dell PowerEdge 1950 with a DRAC 5 installed. When I received the server, the DRAC had v1.0 firmware, so I upgraded it to 1.65. The upgrade was successful, and I can login to...
View ArticleR810 E171F
My R810 is showing an E171F Error,with Bus 0 Device 3 Function 0.How do I figure out which PCI card this is referring to?
View ArticleT320 PCIe
Hello all,A few months ago I purchased a T320 to replace my PE1900. Main reasons were to reduce noise, reduce power consumption and increase performance. I use it as an ESXi server at home which runs...
View Article1420SC Server Memory Beep Code
Background on this server. It has had both a motherboard replacement and a refurbished power supply replacement by Dell several years ago. It failed to start one morning with a Beep Code 1-3-1...
View ArticleDELL c6100 Xanadu-s server not detecting hard drives
Hope someone can help. I have 2 of these Dell Xanadu-s c6100 servers and have the Pci-e x16 riser card with a 4port Pci-e 10/100/1000 network card. When the card is in the server I will get a "unable...
View ArticlePoweredge R200 no display or diagnostic lights, ipmi works
Ok, so 2 nights ago my Dell R200 server became unresponsive (failed to respond to ping or ssh). I power cycled it using IPMI, but it never came back online. Had the data center check it out and they...
View ArticleQuestion on amount of RAM
Working on setting up a Dell 2950 to run on Windows XP Pro. Have the XP OS running on the Dell now but the amount of RAM on the system is being misrepresented under "system".Server came with eight...
View ArticleDell PowerEdge C6100 XS23-TY3 & Dell OpenManage
Hello Everyone;Does anyone know how can I monitor C6100 using Dell OpenManager? I know this box has Tyan motherboard and I have some visibility using the build in IPMI. But I like to know if Dell...
View ArticleNon Responsive Server
I have a dell 840 server, which I have been using for about 5 years. Lately, I have been getting a grey screen and the server gets stuck. At the same time, the network cannot be accessed as well. Once,...
View ArticleHow to move raid from SAS 6/IR integrated onto new Perc H700
I recently replaced the SAS 6/IR integrated with the the PERC H700. What is the procedure to get the OS to boot now? I had a raid 1 on the OLD SAS6/IR, how do I move that to the new controller? Do I...
View ArticleDell C1100 / CS24-TY bios and ems/ibmc update
Hi everyone,We got a stack of "C1100" systems - http://www.dfsdirectsales.com/StoreCatalog/...The iBMC is version 1.50 and is pretty buggy, so we were hoping to update them all before putting them in...
View Article