PowerEdge SC1430 not booting
PowerEdge sc1430 start up runs though the bios and begins booting the SBS 2003 R2 OS it gets to the point of loading the "computer settings" and the fan will spin up fast and then the Server shuts...
View ArticleClik here to view.
New Dell PowerEdge T110 Raid 1 with 2x 1tb. Problem with volumes, USB drive...
Hi,Really need some help here please. Background: I am a software developer mainly, but needed a windows server for developments, testing etc. I have installed OS on other servers, pcs, laptops etc no...
View Articlenx300
Hi,After replace mainboard how i can rebranding the server R410 become NX300? I'm already download utility
View ArticleDELL S45 CS24-SC BIOS Any updates ?
I got a Dell S45 CS24-CS with a A09 Bios does anyone have a newer one they can post or Email me? I really want to get full function of all the Drives in the raid controller.
View ArticlePE2950 RAID?
Hey all,A friend gave me a few Dell PE2950s that he was not going to use. I have racked them and placed two 73GB HDDs in each server. I would like to stripe the install of Windows Server across these...
View ArticleR210 II, high CPU temp.?
I have a R210 II with Xeon 1230V2 processor.I use Linux (Ubuntu LTS) and when loading the CPU i read core temps. above 90*C.I use lmsensors with sensors command and it might be problem with the command...
View ArticlePower Edge 2970, i can't find driver for PERC 6/IR controller
Hi, ability to have a server Power Edge 2970, I need to update the firmware and drivers the controller.I updated the firmware, but can't find where to download the driver for the controller.Controller...
View ArticleProblems with drac5 virtual media
Hello, I am trying to install Debian Wheezy 7.1 on my Poweredge 1950 III. I sucessfully managed to mount (just once) netinst 200mb + .iso image and to start installation via my Drac5 [fw v1.60].However...
View ArticlePowerEdge R510 Fans out of control after ram install and Bios update
Recently we upgraded the bios on our R510 to 1.11 from 1.8 and also added extra 16 GB of ram, its got 1 cpu so we now have total of 32 gb, ram installed was ptn.SNPP9RN2C/8GNow the fans will not go...
View ArticleR710 BIOS/Firmware Upgrade using DRM v1.6.0 and Bundle v4.6.4 issues
Hello,We recently downloaded the new bundle of updates for the DELL R710 and have successfully applied it to several systems in our Environment.This week DELL replaced a motherboard in one of our...
View ArticlePoweredge T100 Won't Start Fans Come on for 1 Second then Quit
When I left the system last night it was running fine after some Windows updates. Come in this morning and it is turned off. I pushed the power button to turn it on and got a quick amber light on the...
View ArticleC6100 PSU's show unbalanced current load
Hi,I have a few C6100's which show an unbalanced current load on the PSU's. The sensors read out by ipmitool shows the following:FCB FAN1 | 4300 RPM | okFCB FAN2 | 4300 RPM...
View ArticleiDRAC disabled
Hi,I installed a new server M620 in the M1000e chassis. I went to web GUI to setup an ip address on the iDRAC, I got error 0x0080 and on the LCD screenit says iDRAC disabled. I also noticed on the Web...
View ArticleMax R720xd on a circuit
Hello,I have a cabinet with four 20A 220V circuits....can someone let me how many R720xd's (two supplies) we can fit in this cabinet.I've assumed 325W per system, and max power is 32A (assuming all...
View ArticleService Tag Utility
Need the Service Tag Utility for a motherboard change. If i could get the file this would be of great help. thanksAlan
View ArticleDell T620 Bios modification
historyI'm in the process of mount SCO Unix OpSys 6.0 in DELL T620 INTEL XEON ES2690, two HD controlers, PERC H310 and RAID H710, two HD SAS disk 1GB eachone attached in perc310.I resolve few of...
View ArticleM1000e CMC firmware upgrade issue
Hi,I want to upgrade the M1000e CMC firwmare to support the 12th generataion servers. The M1000e actual firmware is the original firmware released with the chassis back in 2008. I started by upgrading...
View ArticlePowerEdge 2950 running louder than normal
Hey Guys,I know this model the 2950 generally has a problem of running loud, but recently i have found that my server are running a little extra loudly and i was wondering if the readings i'm getting...
View ArticleViewing the Hardware Event Log on R710 from OS ?
Is it possible to view the Hardware Event Log from Win2008 R2 OS ?There is no connected DRAC and I do not want to reboot to view from BIOS...
View ArticleEQ412 - RPM FAN 4 error message appear after replacing CPU fan
I had EQ412 - RPM FAN 4 error message on my PE2650 rack server.Finding this means error on fan4 from Dell support, I have replaced the unit and confirmed that the fan worked fine.However, EQ412 - RPM...
View Article