Error applying update to SAS Drive
I got the following error while running the .exe file to update the firmware on a hard drive in a PE R610 server:The operation was not successful because the device buffer write has failed. Run...
View ArticleAny plans for more models in the 13th generation?
Hi,I realize this is unlikely to get an answer, but thought I'd ask anyway... [:)]Are there any plans for more models in the 13th generation PowerEdge line-up, specifically at the low end? Say, a T330?...
View ArticleMemory upgrade for power edge T710
I have a PowerEdge T710 ST JJC7FP1It needs more memory it has 4 DUAL IN-LINE MEMORY MODULE, 4G, 1333, 2RX8X72, REGULATORY, C1KCNWhat is the max memory or at least to get it to 32 or 48 G would be best....
View ArticleDell R710 does not start after power failure
Hello, I tried to find answers on the forum but nothing so farI have this R710 at home that I use as a media server, it was running fine before a power failure the other night (no I don't have a UPS...
View ArticlePowerEdge C6100 motherboard replacement
Hi,I own two XS23-TY C6100s running L5639 and L5640 CPUs.I cannot locate details of C6100 motherboard part numbers.Could someone advise if the following motherboards would be suitable replacement?Any...
View ArticleDell System Hardware & Software Updates for October 12 - 16, 2015
Popular DownloadsDell Server E-Support Tool (DSET) 3.7 for Dell serversDell Support Live Image (SLI) 2.2OpenManage Server Administrator (OMSA) 8.1OpenManage Essentials (OME) 2.1.0Servers &...
View ArticlePower Edge R310 Update firmware PERC S300
Hi everyone.I have 3 PowerEdge R310 operating with 3 HDD / RAID5 on PERC S300.If i try updating PERC firmware (SAS-RAID_Firmware_RPCKX_WN32_2.0.0-016600193000_A06) whilst the server is online, the...
View ArticleMemory R420,R520, R620, R720
Will 16GB PC3-8500R 4Rx4 memory modules work with R420, R520, R620, R720?
View ArticleT610 CPU Compatibility
Hi,I have a GEN 1 T610 and want to know what CPU's are compatible with the motherboards.I tried a X5680 but received the error: this CPU power rating is not supported. As I understand this is because...
View ArticleR410 Fan 4 speed may change depending on system configuration and option card...
Getting this error message on my server. I've updated the bios & still get it. Fan 4 is working BTW., as are the rest of the fans, I have system halt on error disabled. Any thoughts?
View ArticleDRAC5 PE2950 Mouse not working but keyboard is working
I have several PE2950s still in use, with DRAC5s on them. I have one machine where, when in virtual console mode, the keyboard works fine, but it won't pay any attention to the mouse. The firmware and...
View ArticleClik here to view.
FreeNas 9.3 Raid 5 poweredge r530
hello, i bought a dell server r530, raid 5, 8Gb ram , 4 Discs with 40 Terra.i´m using it with freenas, it works fine as long as i dont copy data from users. in the grafic is just freenas running, no...
View ArticleWill 1600mhz or 1333mhz RAM work in a R810 server?
Hi guys, I'm looking at upgrading ram in our R810 server. We'll remove all existing ram and replace it with 12x 16GB chips. The only thing is, I'm not sure if 1600mhz or 1333mhz chips will work in the...
View ArticlePowerEdge 1950
I just bought a PowerEdge 1950 and there is an orange blinking light and the interface displays Error 1410 System Fatal Error. When looking up the error I found this in the hardware manual on Dells...
View ArticleGPU installation-PowerEdge T630
My advisor has recently purchased a PowerEdge T630 server and we want to install NVIDIA Tesla K40 in future. It has a dual hot-plug 1100W power supply. It was ordered without a GPU installation kit.I...
View ArticlePowerEdge T320 Memory compatable
hi i got a T320 Server with single processor i has 4GB RAM, i want to expand the memory at least to 16GB.Is there a list of compatable memory modules which can be usedhere is one...
View ArticleDell Poweredge T 310 - Memory Problems
Good afternoon.I have a Dell PowerEdge T310 running Windows 2008 R2 server.It came with 2 x 2GB 1333Mhz Unbuffered memory sticks.(Total 4GB)I added 2 x 2GB 1333Mhz Unbuffered memory sticks and it...
View ArticlePowerEdge R810
Hello,I have an R810 running ESXi 5.5 that locked up and showed an E171F error on the display. I pulled both risers and reseated them, removed both PCI cards on the risers. A little while later it...
View ArticlePE SC440 and PERC H800/810
Hi all. Cant find a good answer online and thought I would ask here. Will the PowerEdge SC440 support a PERC H800 or 810? I am looking to connect either an MD1200 or 1220. Any thoughts or comments...
View Article