iDRAC7 racadm command to delete indexed user
iDRAC7 racadm command to delete indexed user?Background: R720 utilizing the iDRAC7, 1.57.57 firmwareBeen trying to find a way to delete a user account from the DRAC interface. You can add a new user...
View ArticleNo Boot device available, Dell Server R820
Hi I am seeing the following error when my server(PowerEdge R820) tries to boot up. There were 2 Dell Hard drives SSD in the servers. With harddrive-1 inserted in SLOT 0 we could like1...
View ArticleDell R610 and compatible hdd
Hello,I want to use hdd HGST Travelstar 1Tb 7200 for the Dell R610. Will they work? Is it necessary to use interposer?Many thanks.
View ArticleT410 MEMBIST error
Hello All.I want to upgrade RAM on my DELL T410 Server but I have the following error when I try to insert a 8GB RDIMM module:"MEMBIST failure – The following DIMM has been disabled by Bios: DIMM B2"I...
View ArticleR710 upgrade memory
We have upgrading memory of the r710, which slot configuration is the best?4x16gb kingstonn ktd-pe313lv/16gbA1 - A2 , B1 - B2 ?this mode the server say which "ECC mode is disabled"
View ArticlePE SC440 Will not POST
My PowerEdge SC440 would not boot the other day. I unplugged the power cord and pressed the power button to clear any possible memory errors. After reconnecting the power and pressing the power button,...
View ArticlePowerEdge support windows server 2012.
Hi,I've got a PE2950 and PE2850 servers. I'm planning to upgrade my OS from Windows 2003 to windows server 2012. my question is..does this servers support windows server 2012? if yes, which...
View ArticleiDRAC firmware upgrade "No space left on device"
Hello,i'm trying to update an old R610 server using a ISO image made with Dell Repository Manager.The firmware and bios are updated now but i can't update iDRAC firmware.I also tried to upgrade iDRAC...
View ArticlePoweredge T110II
I purchased a Poweredge T110II server last week for a new office. It was delivered on Friday and I had set aside today to connect it. However, I plugged it in, powered it up and I"m getting a Media...
View ArticlePowerEdge 2900 system fan 4 failure
Good Afternoon,Does anyone know specifically which fan this might be? Anyone have a pinout diagram for this MB? NX642The server is 60 miles away and I'm trying to determine which fan it is so I can...
View Articler410 ssd and caddy
We are replacing a failed R410 with a R430.Thing is we would like to use the dell SSD disks from the R410 in the r430,We have checked compatibility and it seems the H730P is okay with the ssd drives...
View ArticlePE 2900 series III PCIe Training error, RE-FLOW candidate???
last week my 2900 series III wouldn’t boot and gave me a fail safe error. after disassembling it and re assembling it booted and operated fine. Sometime during the week it crashed again, now it is...
View ArticleR720 Firmware update error
I try to update R720 onboard network card firmware, but i got an error. I run hardware diagnostic and got an error code 2000-0620 and validation 92729. What can I do next?Thank you for the help!
View ArticleRAM speeds impact on website/server
Hi and greets from Finland!I'm suppose to accuire new hardware, and I'm not sure what's the most efficient way to go.I have two options at hand: the R900 or R710/R910 Poweredge.I'm just wondering, how...
View ArticleRails do not fit in APC Netshelter AR1100a
I recently purchased an APC Netshelter AR1100a rack. I went to go throw my poweredge 2950 versa rails into the rack when I realized they do not fit. The depth of the rack is fine, its the flanges. They...
View ArticleServer not starting
Hi Team,I got a new motherboard for R410 server, I have installed all the peripherals. But when I power on the server, all fans runs on extremely high speed but nothing happens. Front LCD don't shows...
View ArticleR710 Insufficient power so CPU and RAM run at minimum speed after DIMM re-seat.
I have 6 R710s that all have the exact same hardware configuration. 2 Power supplies, 2 CPU, 12 DIMMS no HDs. One of them had a DIMM unseat and showed an error. I re-seated the DIMM and the problem...
View ArticlePowerEdge R630, iDRAC8 virtual console will not pass keys to server - need to...
I cant use "ctrl-alt-f1" to change to a virtual console, since that keysequence is picked up by mybase os.What i really need are a bunch more macros like "ctrl-alt-f1 thru -f9" - since I cant seem to...
View Article1000W UPS Update software fails
I am trying to upgrade the firmware on a DELL UPS Tower 1000 but the DELL UPS Upgrade Software does not connect to the UPS. I've tried both USB and serial connections to the UPS and neither work, both...
View ArticlePowerEdge SC1420 - memory module problem?
Hi guys,I know this is not a new server, but I have problem and mybe someone could help me. My server want start and based on the light indicators, I have problem with memory modules. I have find the...
View Article