R730 DRAC display enter key not working
I just unboxed a new R730 and the check/enter key on the DRAC display doesn't seem to be working. The left and right scroll keys are but the enter key isn't.Is there something that I could check from...
View ArticleDEDUPE-DB error in Openmanage under Virtual Disk
hi guys, i am seeing "DEDUP-DB" error message, this server is out of warranty and i can not talk to any eng. can someone please help ?Thanks
View ArticleR610 Memory upgrading with mixed memory
Hello, I have been searching for answer with mixed memory upgrading and I have found 2 answers what collide to each other. We want to upgrade our 4x r610 with 2 CPU's servers and have some load...
View ArticleDPE2900 RAM Upgrade
I see that the YM-158 motherboard has four banks of three RAM slots.I currently have the first slot of all four banks filled with crucial CT51272af667 4GB RAM (total 16GM RAM).I'd like to upgrade the...
View ArticleIs there a Lifecycle controller repair package for 13g?
I see the LC and idrac FW are together now in a DUP. Great move Dell. Is there currently or will there be a stand alone LC Repair package for 13g? I don't need it yet but I make a habit of downloading...
View ArticleUnexpected/Unexplained ASR "System Board OS Watchdog: Watchdog sensor for...
1. Now there is a flashing red light on the front of the server due to this ASR. How do I clear the flashing light?2. I know I could go into the BIOS and disable the power reset upon watchdog timer...
View ArticlePOWEREDGE change in 2900 with ESXi to Windows 2012
Hello I need help because I change the OS of a Poweredge 2900 with ESXi 4.0 and install windows 2012boot from cd Sistem Build and configure the installation of windows 2012 . but the system finishes...
View ArticleDELL R320 DAS Connection
Good Day!Please advise how to connect R320 to DAS Model MD 1220 or MD 3220.
View Article64 bit OS
Hi, I have a t310 poweredge that I would like to repurpose. Can someone tell me if this box will support a 64 bit OS? What kind of memory do I need?Thanks for any and all replies.
View ArticleNetwork link issue VRTX
HiWe have a problem when connecting the ports of Pass-Thru Module to a "switch cisco 2960S", the server (windows 2012 R2) gives an error "Network Cable Unplugged" on both cards, and no Network link in...
View Articleram compaire
dear sir ,i need your kind support to know what type of ram have greater efficiency and the difference ? (16GB RDIMM, 1333 MHz, Low Volt, Dual Rank, x4) or(4GB RDIMM, 1600MT/s, Low Volt, Single Rank,...
View ArticleFan always runs on High/Loud after reset - Dell PowerEdge T110 II
The fan in this Dell PowerEdge tower server is very loud when running on high.At first, it ran constantly on high, even though the server was barely being utilized.I finally found a setting in the BIOS...
View ArticleDo MPUIQ-VMCHS SIP Modules work on Dell 2161ds or 4161ds KVM?
Hello,We have some 2 upgraded SIP cables, MPUIQ-VMCHS Modules, which we would like to use for remote media installation purposes. We plan on using them on a Dell 2161DS KVM switch and a Dell 4161DS...
View ArticleT310 upgrade memory
Hi, I have a problem to expand the memory of my Power Edge T310 server (currently have 4GB) want to expand memory to 8GB with 2 each. When I insert the memory shows me a memory error on the front...
View ArticleExpand memory on PowerEdge T310
My Server: PowerEdge T310 Current memory (2 units): Samsung 2GB PC3 1Rx8 - 10600R-9-10-A1-D2 2GB PC3 1Rx8 - 10600R-9-10-A1-D2 I want to install these new memories (2 units): 2Rx4 8G DDR3 1333 REG...
View ArticleMultiple K20 Kepler GPU cards incompatible with C6100 host server?
We have a Dell C410x PCI-e expansion chassis fitted with 3 x M2090 GPU cards and 2 x K20 cards. The host server is a C6100 fitted with two blades with iPASS connects to the C410x so that the M2090...
View ArticlePowerEdge T110 Degraded Raid
I'm running a PowerEdge t110 with PERC S100 Embedded Controller. I have two drives in a raid 1 configuration. My raid array is showing degraded. Both disks pass diag and are in an "Online" state....
View ArticleUbuntu doesn't boot unless booted from USB.
Hello,On my PowerEdge 1950, I ran into a rather interesting issue. Once I install Ubuntu, the system does not boot unless the USB which I installed the system from is connected to the server and the...
View ArticleConfiguring a iDRAC 7 to use DDNS (Dynamic DNS)
Hi,I am wondering if it is anyhow possible to configure the iDRAC for DDNS. Either a well known service like http://dyn.com but a custom service would also be very interesting.The specs I found on...
View ArticleFile version numbers - leading and trailing zeros
There are a lot of issues with version numbers when it comes to firmware and drivers. I would like to hope that some sort of consistency or collaboration between those who type the documentation and...
View Article