R815 pci express error interrupt
Hello,We have a cluster of 20 R815 machines that were all powered off and restarted today. All but one machine rebooted fine. The computer that didn't boot had the error:pci express error interrupt...
View ArticleT20 DisplayPort connections support audio?
I know it is odd for a server, but I need to connect a TV to the T20 with a DisplayPort to HDMI cable. Picture is fine, but I am not getting audio on the TV. A. Does the T20 pass audio over DP? B. If...
View ArticleFeeling the heat of summer? Join the conversation about system efficiency!...
Hey DCF community and Rockstars!Summer is here and I know we are all feeling the pain from sun burn or higher energy costs but probably both! One of the topics we are often asked about is system...
View ArticleClik here to view.
PowerEdge R420 has issue: "System board 1 riser config err 0 config error out...
Hi all,My server has deployed VMware ESXi 5.5.0 and has alert as title:""System board 1 riser config err 0 config error out of 434 sensors"I performed some workarounds but the issue still...
View ArticleClik here to view.
Dell UPS 5600w - Remaining battery time always 0% after graceful shutdown
Hello,we just got a new Dell UPS Rack 5600W. It works fine so far, there is just one little thing that I can't explain.During our graceful shutdown tests, we discovered that after the UPS gets powered...
View ArticleBLADE CHASSIS1 PowerEdge M1000 e
This M1000e has 8 ESXi 5.1 hosts and directly connected to the Dell Compellent SAN. We need to change the mid-plane of the M1000 e.We will shut down all the 8 Blades. Do I need to do anything to...
View ArticleMAS022 in "device manager"
Hi after a Firmware and bios upgrade (via lifecycle controller) on an R720, I am noticing a new device in my Device Manager: MAS022 in "device manager" listed under storage. How can I make this go away...
View ArticlePowerEdge 2900 E1410 CPU IERR was asserted
I got a error mesaage in the front panel of PE2900 E1410 CPU1 was asserted.(CPU1 Status: Processor sensor for CPU1, IERR was asserted). The problem is fixed by restarting the computer yesterday....
View ArticleMemory Upgrade - 16GB 4Rx4 PC3L-10600L
Sorry if this has been asked a million times.............. I have 2 PowerEdge R510's with BIOS fully updated. Bought 4Rx4 PC3L-10600L memory sticks. Server will not recognize them. Are they compatible...
View ArticlePowerEdge VRTX with R1-2401 VRTX 1Gb Switch Module - cannot connect port gi1/1
I don't know if this is a server or network issue, but I post here anyway..Trying to set up a Dell PowerEdge VRTX with a R1-2401 VRTX 1Gb Switch Module. But port gi1/1 insists that is in a down/down...
View ArticlePE T620 - Cooling-Fan Assembly
Hello all,Where can I acquire an PE T620 Cooling-Fan Assembly / Redundant Fan Option, item # 331-5673? It's not listed on Dell Parts & Accessories. Thanks.
View ArticleiDRAC 7 Not respond
Dear All, Please advise solution to fix the problem (SW0700: iDRAC is not ready. The configuration values cannot be accessed.) on Dell PowerEdge R720 Server.
View ArticleIs there any way for me to use 8 sticks of RAM in my r610 when RAM slot b4 is...
Hi all,I am trying to upgrade my R610 to 16 gigs of ram, and am getting beat up terribly. Slot b4 is bad, and the bios disables it on every boot. I have tried just populating channels 2 and 3, but it...
View ArticlePoweredge R610 Mixed Memory
I had a question regarding this Mixed Memory.....we are adding memory to 2 of Our R610's and got the Warning regarding the Mixed memory....but it booted up and seemed to run fine. soooooo where are...
View ArticleInstalling New HDD on PE 1950
Hi All,I recently had a PE 1950 which I am planning to use for 3d and other engineering applications. I managed to get a new HDD with specs below:Ultrastar 15K600 HUS156045VLS600, 450 GB, 15k RPM,...
View ArticleiDRAC 7 Launch Virtual Console fails with Access Denied Error
Hello,whenever i attempt to launch video console from idrac 7, it fails with an error "Access Denied" This is weird because i am logged in to idrac as the root user. i am using JDK 1.6 . I have tried...
View ArticleClik here to view.
dell R710 on ESXi 4.1 upgrading to 5.1 error
I downloaded the dell customized esxi 5.1 recovery CD from http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=XWYR5but when i try to upgrade my esxi 4.1 server it give an error about...
View Articledell precision R5400 dell power edge 2600 dell 582 dell power edge console...
ok so I have a rack that stands to my chest, with 24 slots for different servers. I have the dell precision R5400 work station or server slide into it.. and the dell 582 under it.. has a dell power...
View ArticlePERC H310 WHS 2011 driver
Has anyone managed to resolve this yet ? I also have a PERC H310 in a mini server running WHS 2011, and have the same issue, I currently have the driver -...
View ArticleChanging CPU from a socket to another
Hello everyone , Hope you can give me some help with a poweredge 2900 having 2 CUP's sockets but Only 1 CPU , the 1st socket is OFF the server boot but nothing happen , i changed the CPU to socket 2 ,...
View Article