Clik here to view.
iDRAC Web Management Broken
I have a Dell R710 running Server 2012 R2. The iDRAC web portal is currently displaying the following:The firmware is currently at1.96. I've attempted an racreset, but received the following...
View ArticleFull Height H710 Cables
I have a R720 with 3.5" backplane and would like to upgrade the H310 controller to a full height H710 preferably in slot 6 or 7. What are the Dell part numbers for the cables and their lengths?
View ArticleConnecting an LTO-6 drive to my Dell 2950 server
Hell to all and thanks for any help you can provide me.I need to find out how I can connect an LTO-6 drive (external) to my existing 2950 system. I have a small raid 0 running on three 75gb SAS drives....
View ArticleExport private key from DRAC SSL certificate
I have created a CSR from DRAC menu and signed it on domain certificate authority. Now I want to export private key to import it into Riverbed appliance. Is it possible?
View ArticleConfiguring Dell 1000W UPS with Eaton ipp-linux software
I just purchased a new Dell 1000W UPS for my PowerEdge T320 server. The server is running RHEL 6.5.I installed the ipp-linux 1.40 driver on the linux host and have the admin tool fired up.When...
View ArticleDell OpenManage Console 7.4
Are the source rpms available for this version downloadable at Dell anywhere?Have a 32 bit install of RHEL 6 ...only have the 64 bits pre-built...
View ArticleR610 Fan Speeds
Greetings Folks..I have two R610's, one of which sounds like an airplane and the other is as quiet as a normal desktop.The quiet system runs (idle) at 24C, with fan speeds between 3000 and 4560 rpm....
View ArticleR710 Sas 6/IR Upgrading to from 2008 to Server 2012 R2
Hi all Just wondering if anyone has any specific advice, I want to upgrade one of our R710 to Windows Server 2012 R2 from 2008. Will there be an issue with any of the components / drivers etc.. Thanks...
View ArticleMemory Installation- Dell Power Edge R 710
Dear Team,I have Dell Power Edge R 710 with Windows Server 2003 R2 standard edition 32 bit OS, i have replaced 4 GB (2 X 2GB) memory module with 16 GB (2 X 8GB) memory module. But in System properties...
View ArticleIs it possible to install a 3D graphics card in a 1U PowerEdge SC1435?
My company has a Dell PowerEdge SC1435, and we would like for some of our employees to be able to occasionally log in to it through Remote Desktop and run a specific 3D application on it. The 3D...
View ArticleMemory Upgrade to 8gb Dell R200
Hi all i have a new kit of Elpida 2GB 2Rx8 PC2-5300P-555 8GB Memory but if i put 8GB in the server the server bleeps and wont boot even whit one stick i got the datasheet...
View ArticleT320 stucks at initializing firmware interfaces
HiAfter having installed an Adaptec 2045 RAID card in my T320, it refuses to continue to boot. the problem persists even if I deactivate completely LCC... I need machine running urgently. Please help...
View ArticlePERC H7000 how to expand RAID 1 Virtual Disk.
we have a 146GB system volume. 2 x 146GB I have added another two hard drives (2 x 146GB)How do I increase the space of the system volume without having to create another RAID 1?
View ArticleDell Power Edge DRSX-13PE40, unable to boot from USB to install OS.
Please help, I have is refub, Dell Power Edge DRSX-13PE40, RAID, unable to boot from USB to install OS.I got into setup to make sure, boot sequence have USB. I find 2 usb deices, one drive and...
View ArticlePowerEdge R720 memory error limit reached
I have a PowerEdge R720 running XenServer 6.2. We have received this error for the second time in the last 3 weeks: "MEM0005 Persistent correctable memory error limit reached for...
View ArticleDell Power Edge R 710 - Memory not Available
Hello,Dell Power Edge R 710, Windows Server 2008 r2 x64, memory was upgraded from 32Gb (4*8Gb) to 64 Gb (8*8Gb)BIOS shows all 64Gb, But system shows: 64Gb (32Gb available) Dell OpenManage Server...
View ArticleConfiguring a RAID 1 on a Dell T420
Hi ,i just bought a DELL T420 , i'm new to DELL servers as i always buy HP one.what the procedure to configured raid with 2 X 1 TB and installed windows server 2008R2thanks for your prompt reply
View ArticleDell Poweredge R410 and Virtualization / VMWare Support
Can I install and use VMware EXSi 5.5 for virtualzation and virtual machines as well as VMware hypervisor in following server? DELL Poweredge R410 with 2 x Intel Xeon QUAD-CORE E5530 2.4 GHz...
View ArticleR620 needs USB3 or eSATA PCI card. Suggestions?
We need to attach some fast, external storage to this R620, but I have not had much luck in finding a PCI-e eSATA or USB 3.0 card that works.I use the exact same cards that I've used in other...
View ArticleClik here to view.
PowerEdge T100 BIOS won't update
Guys,I have a T100 and I'm trying to update the BIOS so we can install RHEL 6 (Server 2003 currently) and I'm running into some issues where the BIOS won't update.Currently installed 1.0.0Just...
View Article