PE R710 with intermittent Core temperature above threshold error
I have a DELL R710 that intermittently gives the following errors within CentOS release 6.3 (Final):Mar 24 11:43:04 swamp.mail.uwo.pri kernel: CPU10: Core temperature above threshold, cpu clock...
View ArticleC6100 xs23-ty3 CPU failure
Hi Everyone,I am trying to figure out what is wrong with one of the nodes in my c6100. It does not work and I dont get any beeps etc. Is there any way I can establish what component is failing if I...
View ArticlePowerEdge R720xd
Have a PowerEdge R720xd that is showing Chassis tamper I can not find the tamper nor do I have any idea where it is located also if it is broken can I get a new one.
View ArticlePowerEdge 2900 Rack to Tower Conversion
I recently picked up a PowerEdge 2900 server that was supposed to be a tower, but it actually was a rack mount system (the seller used a stock photo of a tower...). In its application it needs to be a...
View ArticleBest/easiest way to update BIOS on 2950 Revision II?
I'm using this PE 2950 as an ESXi host currently. I'm pretty sure this thing is running BIOS v1.2.0. I'd like to update both the BIOS and the EMS.What would be the best and easiest way to perform...
View ArticleAdd on video card recommendation for PE T110
Hello,I am new to the forums here.. but have searched them for answers regarding the PE T110. Now it is my turn to ask a question. I recently purchased a PE T110 and wanted to upgrade the video with...
View ArticlePowerEdge T100 12volt power error
I have a PowerEdge T100 Server when it shutdown and I went to restart I received the 4 flashing amber lights representing power issue. Sure enough power supply was bad. I replaced the power supply and...
View ArticleKVM 2162DS update
I am trying to find firmware updates to fix several issues my a KVM 2162DS is having like the Java 7 Update 51 blocking KVM session. (BTW I found the work around for that but still want a firmware...
View ArticleAny risk of Heartbleed vulnerability on R710 servers?
We've been looking at all hardware and software in our infrastructure to see what is affected by the Heartbleed vulnerability. At first we thought it would just be our Linux webservers, but as we dug...
View ArticleDell 1950 - degraded link width error
HIone of our servers went down in the night. I connected to its KVM and it shows after BMC on bios:degraded link width error: embedded i/o bridge device 1expected link width is x4actual link width is...
View ArticlePowerEdge R710 BIOS update problems
I used the SUU to update the BIOS (went from 1.2 to 6.4) and upon reboot, the server won't POST. I don't get any activity beyond the iDRAC6 initializing. I cannot access the iDRAC6 remotely.I have...
View ArticlePowerEdge R210 II Rebooting on it's own
Hi Everyone,I have a PowerEdge R210 II with SBS 2008 installed that is rebooting almost on a time schedule. However, it does go on randbom other reboots. No there is no scheduled reboot as a task...
View ArticleProblem with Broadcom Gigabit Drivers and Dell Sbs2011
Hello, I have a DELL server that came with SBS 2011 standard pre-installed, as part of the config i wanted to Setup teaming for more Speed for the Networktraffic.. However when i load the BACS4...
View ArticleT 110 ii graphics card
I bought this server for a steal as recommended by extremetech and have been having fun trying to bend it to my will. I bought it for bitcoin mining and have since sold the miners and have been making...
View Articlee1410 error only when raid configured
I recently acquired a poweredge 2950 with service tag (SVCTAG removed by admin) w/o an OS, and I'm working on setting it up. The first thing I noticed was the E1211 Romb battery error. I unplugged...
View ArticlePowerEdge Compatible GPU List
Hello,I want to use Nvidia GPU on PowerEdge servers. I know R720 configurable with GPUs but are there any specific list of graphic cards with the server is compatible. I would like to use Tesla K10 and...
View ArticleGigabit 2P I350-t Firmware Upgrade Fails
I have updated the firmware of the 2P I350-t through Livecycle but then started to lose port 2 and also got the error: PXE-E05: The LAN adapter's configuration is corrupted or has not been initialized....
View ArticleBrand new T320 System Board PS1 PG Fail
iDrac and Dell Open Manage keep reporting a voltage error with "System Board PS1 PG Fail" I called support and was asked to create a DSET report. After viewing that support claimed it was probably some...
View ArticleR910 backplane x4 to x16?
Hi I have a R910 with the x4 SAS backplane - Just wondering if it's possible to order the x16 backplane and put it in myself.
View ArticleChange Service Tag in BIOS after motherboard replacement - PowerEdge R610
I have tried all of the various recommended procedures to update this value in the BIOS, however, nothing has worked. Is there a secret to doing this on an PE -R610 server?
View Article