Clik here to view.
PE 2900 - PCIE Fatal Err
HI,2900 Server (server 2008) has started crashing with the below errors. Has anyone experienced this?Open Manage shows thisSat Sep 14 07:45:08 2013PCIE Fatal Err: Critical Event sensor, bus fatal...
View ArticlePowerEdge R715 power consumption
Hello,I'm using Debian 5 on my PowerEdge R715 which has iDRAC6 Express. Is there some way to see the power consumption?
View ArticlePoweredge 2950 boot problems
The following errors E1A11 Pci Rsr Config and E1A12 Pc Rsr Missing is usually displayed on the LCD, and server can not be switched on.Expansion card raisers had been checked and repositioned just in...
View Articleraid level vrtx
i got a vrtx chassis with 2 blades and 10 6GB/s sas disks 300GB each. I will be installing esxi on both. should i use raid 10 or raid50? If i use raid 10, should i use all 10 disks and leave 2 spares?...
View ArticleDell PowerEdge 2950 - Log Drac: "no memory installed"
Hi friends,please, see the problem description:the server was power off, after i power on, then, i get problems to access to host and virtual machinies. I get logs by the card Drac, appearing the...
View ArticleWindows 2008 R2 Server on a PowerEdge 2850
Can I install Windows 2008 R2 Server on a PowerEdge 2850?
View ArticlePE2800 Memory Issue
I am trying to get 4 2GB single rank DIMMs to run in a PowerEdge 2800. Everytime I populate DIMM slots 1a, 1b, 2a and 2b I get a single long beep at boot and an inconsistent memory error. I know...
View ArticleR610 RAM Configuration
We're upgrading our RAM on our servers. They all currently have 2gb DIMMS. We have purchased 8 gb DIMMS. How would be best add the 8 gb DIMMS to our servers to get the max memory? For example,...
View ArticlePowerEdge R520 Memory Upgrade
Hello everyone, hope you could help me on this one:I don't know why it's so difficult to search for a memory upgrade: when displaying the original configuration with the service tag, the "Parts Number"...
View Articlepcie training error embedded i/o bridge device 6
our poweredge 1950 was working well untill we removed it from the rack for simple servicing. after fixing it back into the rack, it failed post.it says pcie training error: embedded i/o bridge device...
View ArticleAdding Dell PowerEdge Servers to a Rack
I have 2 Dell PowerEdge machines and I would like to add them to a rack. I'm confused on what type of rack I need to mount these. If I want to use the rails, do I need a special Dell cabinet? I was...
View ArticlePowerEdge T100 becomes unresponsive with side panel installed
I have a 3.5 year old T100 server with a Core E5700 CPU that has worked perfectly for until recently. The problem is when the side panel is on, the server will be running but become unresponsive. The...
View ArticleR410 keeps losing connection with one of the installed PSU's
HiI have a R410 which keeps losing its connection with either the first or second power supply. I have tried swopping and reseating these power supplied to no avail. The server never goes down, but its...
View ArticlePowerEdge T300 Randomly Rebooting
Hi EveryoneMy Dell T300 (w/ Windows 2008 Server) is acting very weird, the problem started 2 weeks ago and every couple days or every other day the server all of the sudden it reboots. This server...
View ArticlePoweredge 2850 front panel LCD scrambled
The front panel lcd on my poweredge 2850 is scrambled. I've tried replacing it and it is still scrambled. I have reflashed the bios, esm, and bmc and re-seated the daughter card where esm apparently...
View ArticleDell T620 Bios modification
historyI'm in the process of mount SCO Unix OpSys 6.0 in DELL T620 INTEL XEON ES2690, two HD controlers, PERC H310 and RAID H710, two HD SAS disk 1GB eachone attached in perc310.I resolve few of...
View ArticleCPU compatibility C6100
I have a PowerEdge c6100 arriving soon. It is a bottom end model with the Xeon 5520 processors. For the majority of what this server will be used for, that is more than enough. But for one blade...
View ArticlePowerEdge R910 - RHEL 6.4 - Clocksource problem
Dear All,I am running RHEL 6.4 in a PowerEdge R910. When I do:# dmesg | grep -i clockI am getting a lot of messages with this text:"Clocksource tsc unstable (delta = 580433372 ns). Enable clocksource...
View ArticleM1000e not recognising M710
We have recently moved an m1000e to one of our remote sites. It has four M710 servers, three of which are working fine. However I cannot power on the fourth blade. The CMC for the enclosure is showing...
View ArticleFew more questions about the c6100
With the looming anticipation of the server arriving, I am looking into several secondary factors. 1: I read that the approximate dB of this server sits around 70 dB, Any suggestions as to dampening...
View Article