dell PowerEdge t110
hi iam having problem with this server at the start up it keeps asking me to press ctrl e and setup the ip and orther setting so that my server can use the dell servers to connect and update all...
View ArticleClik here to view.
R610 - USC - "Operating system installation is not supported on this system"
HiI've upgraded firmware of R610 server before reinstalling to Windows Server 2012. All components are now up to date - please see details: http://www.scio.cz/1_download/!/Dell_update.pngBut OS cannot...
View ArticleWhat processor stepping is in the GW190 X5460 SLBBA or SLANP?
Hi All, I have a PowerEdge 1950 III and would like to know what processor I need to get. From my original order it shows as GW190. Is this a SLBBA or SLANP processor? If I am unable to identify which...
View ArticleDell UPS 2700W, MUMC and vSphere 5.0 configuration
HelloI have a Dell UPS 2700W with network management card and two R720s running ESXi 5.0. The two hosts are part of a HA cluster and I would like to be able to shut them down gracefully using MUMC in...
View ArticleDRAC's dropping off the chassis....
Hi,Until version 4.40 of the m1000e chassis firmware we never had an issue on 43 chassis with blade drac's dropping off the chassis.This is a weird issue and we have no pattern to report, but randomly,...
View ArticleBlinking cursor when booting a poweredge 1850
I have a dell poweredge 1850. I booted one time and it booted fine. Then I powered it off by pressing the power button on side. Pressed the power button again and then when it boots, it displays the...
View ArticleClik here to view.
PowerEdge UPS Settings
Hi all,I'm currently running through the setup for a PowerEdge UPS I am settings up but have a question about the following settings: Could someone tell me the different between shutdown timer and...
View ArticleHow to get the HostName to populate for Linux in the DRAC.
We have Redhat Enterprise Linux 6.2 running on various Dell blades.On the Chassis, we want to see the Hostname appear (under Server Overview/Setup/Slotnames). So we run OMSA for this.It seems that we...
View ArticlePowerEdge 2950 rack server fan replacements
hello there,I wonder if there are better fan replacements for the PowerEdge 2950 rack server sold by Dell itself, and are far less noisy (and at the same time do proper cooling).I did a relevant...
View ArticlePowerEdge 1900 - No video
server poweredge 1900 with error E2011no video i have maid a swith of memory with no result
View ArticleSC420 A01 BIOS Update Error "Flash Access Denied"
I can't update my BIOS from A00 to A01. When I click on the SC420A01.EXE I get an error message that says "Flash Access Denied - Please make sure you are logged in as Administrator then try...
View ArticleCMC on M1000e reporting incorrect server information
I've procured some M610 servers from ebay. No errors, and all hardware works fine. However, the CMC (v4.45) and iDRAC (v3.5) reports one of the servers has 2 processors, 24GB of RAM, and no C fabric...
View ArticleClik here to view.
Perc H200e latest drivers and Firmware
Hi,I'm trying to find the latest for the above.When running OMSA 7.3 it says that the latest available Firmware version is 07.03.06.00But I can't find that anywhere on dell.com.Can someone pls...
View ArticleUpgrade PowerEdge T410 CPU
I have a PowerEdge T410 with a Xeon e5502 two core processor. I would like to upgrade it to the e5506 processor with four cores. I have one available and am wondering if the motherboard will handle...
View ArticleUpgrading T310 RAM
Hello,I have a T310 that I would like to upgrade the RAM in. It has the latest BIOS (1.11.0) and I would like to install RAM into it that I believe should be fully compatible. I have four 4GB sticks,...
View ArticlePowerEdge T620 conversion kit from rack mount to tower
Hi All,So we made a mistake on our order from Dell for a PowerEdge T620 server. We ordered the server as a rack mount when the customer needs a server to be in a tower configuration. We need a kit or...
View ArticleT320 Hardware RAID Available?
I went to configure a T320 and found that the online order configurator only permitted "Software RAID."Anybody know why this is so? I'm really not keen on "Software RAID" and I wonder if there's a...
View ArticleFans goes max speed on Dell blade Chasis frequently
Hi ,I have 14 blade servers and my chasis fan goes max speed frequently ,can anybody suggest me a solution ad why this happensChasis- Power Edge M1000e
View ArticleDELL POWEREDGE CS23-SH and PCI-e Network card
HelloI'm tring to add next network card Intel® PRO/1000 PT Dual Port Server Adapter PCI-e to DELL POWEREDGE CS23-SH I installed this card on server and OS (Debian do not see this card) I'm also...
View ArticleService Tag Change for Dell R510
I am looking for a Dell Service Tag utility for a dell R510 server. Need to enter new tag after motherboard change
View Article