iDRAC6 Console Issue
I recently updated all of servers with iDRAC6 modules from firmware version 1.99 to 2.80 as some of them became un-reachable and required a reset. After completing this I found when launching the...
View Articleidrac initialization error causing running with a lot of noise
During the boot up of DELL r320, we are getting idrac error. idrac cannot cannot even be accessed in bios.probably due to initializationn failure during boot uo.We are booting from F1 Key, however the...
View ArticlePower Edge T300
My server have this problem: Call Support E122A CPU VITT PWRGD E 1214 1.5V I1911>3 ERRS CHK COGWhat I have to do?
View Articleerror server Dell poweredge T300
Hi,I have an error message to Server Dell: "Call support E122A CPU VI TT PWR GD E 12141.V I1911>3 POWER EDGE T300 ERRS CHK COG E100 FAILSAFE." ???????thanks
View ArticleOne Dell R910 Server is becomes Non-responsive and it shows "E1410 System...
Hi All,my server is becomes Non-Responsive and fron screen shows E1410 System Fatal Error,i have boot the server with minimum POST but no success can any one help to resolve this?Regards,RA
View Article11G Servers - Update BIOS Splash Screen?
Hello,We would like to update the BIOS splash screen image from the default blue Dell logo to a corporate standard. What methods are available to do this? We also want to be prepared to revert the...
View Articlelcd error PWR1006
I've got a r720 with 2 495W power supplies with 6 7.5k HDDs and 2 SSDs. When I power up the LCD screen shows the error PWR1006 saying not enough power is available, the wattage being pulled is only...
View ArticleiDrac 2.21.21.21 virtual console port bug
Hi all,we have a R430 with an idrac 8. We need to access to the virtual console, and, for many reasons, we need that its port is different from the default one (5900), let's say 5905.Everything works...
View ArticleDo you know vps
What is your choice for VPS Control Panel? I've had Parallels in the past which I loved because I do not need simple. However, my VPS was moved to a newer and faster server recently but now has OpenVZ...
View ArticleClik here to view.
Using a separate nic to PXE boot
HIOn a R420, it has onboard dual broadcom nic which isn't performing too well. We've added a Intel Quadport nic as shown here:I went in to bios and disabled onboard nic. however i am unable to PXE...
View ArticleT320 Memory Upgrade
Last year I got a T320 with 4x 8GB 1600 single rank memory setup in ECC. I'm looking to up the memory in the system now and would like to purchase 2x 16GB sticks and use the remaining slots. I know the...
View ArticleDell R410 Memory Upgrade
Hi, everyone!I have Dell R410 2xE5506 6x2GB Hynix DDR3-1066 PC3-8500E 2Rx8 non-Reg ECC RAMNow I need 32Gb memory. I want take out all 2Gb memory and put 4x8Gb (for example this one).Question.Will this...
View ArticlePowerEdge 2970 dvd drive driver
I need to locate a driver for this system ... the only thing on the dell site is firmware. I need to reinstall Windows Server 2012
View ArticleDo you know vps?
I want to choose the best web host that provides reliable email hosting services.I've had Parallels in the past which I loved because I do not need simple. However, my VPS was moved to a newer and...
View Article6950 Requires Opening Case to Boot, then Powers Off Randomly
Hello everyone,I have, what I think is, a weird issue with a PowerEdge 6950. I just received this server to act as an Software Instrument server, and it has proven to be rather reluctant to live....
View ArticleR410 HDD
I have server R410 with 4 x X150K Dell 300GB 15K RPM 6Gbp/s SAS 3.5", RAID 1and server R710 with HDD 600Gb 15K RPM 6Gbp/s SAS 3.5"Can I buy one spare disk 600Gb for two severs? Will hdd 600Gb work in...
View ArticlePowerEdge T110ii BIOS upgrade failed
Hi all,I updated the BIOS on my T110ii server to the latest version (2.8.0), and all went well during the upgrade and the updater rebooted the machine. But now the server does not boot anymore. It...
View ArticleCan't disable processor c-state feature on r720?
Just upgrade my r720 rack to the latest BIOS 2.5.2 and ensure the system profile is set to "Performance" in which the C-state feature is tagged "Disabled", but in the OS (RH6) I can still see the...
View ArticleiDRAC 7 Microsoft Active Directory authentication
Hi,I have setup Microsoft Active Directory on iDRAC 7 with very basic options (no certificates, no Single Sign-On, no Kerberos Keytab, Standard Schema). All works well.The problem is that we have 2...
View Article