PowerEdge 1950 II PCI Riser
Hi,I have a Dell PowerEdge 1950 genII.But it holds an PCI64 riser,And i have seen on different forums that it could be replaced by an PCI-Ex riser.With PN: FP332I have bought the riser to find out that...
View Articlereset bios password not working poweredge r720xd
I want to change the boot sequence on a poweredge r720xd but I don't know the setup password. According the manual I have to reset the PWRD_EN jumper on the systemboard. When I do this nothing...
View ArticleDell PowerEdge T610 BMC issue
I suspect the BMC firmware of a PowerEdge T610 got corrupted during a firmware update using the Dell SUU since it fails to initialize during POST without opting for the controllers settings with...
View ArticleDell PowerEdge T110 Server with 16 GB of RAM only has 8 being recognized by...
Hi all,This is starting to drive me nuts. I just recently upgraded my Dell PowerEdge T110 server from 4 GB (I bought him with 4 GB back in 2011), up to 16, though I began with 8, and the saga just...
View ArticleiDRAC 7 express , nic teaming
Hi There,I am unable to access iDRAC when NIC teaming is configured. Is this as per design? Is there any workaround for this?#idrac7express #NICteaming
View ArticleDell R730 Intel X710 NIC Driver/Firmware issue
Hi all,I have some Dell R730 server with Intel(R) 10GbE 4P X710 NIC.After rebooting the server few times, the NIC was not recognized. Using lspci, the NIC still there but the no ethernet interface...
View ArticlePowerEdge R320
We have several of these R320 servers in house. It appears there is an issue with slow downs, high cpu, on several of them....not all the time, just about once every other week. All servers run...
View ArticlePowerEdge R300 Support which L5400 ?
Documentation I have seen said the R300 support L5400 up to 2.33Ghz, thus I assume the Intel Xeon L5410 2.33Ghz has been tested to work. Anyone know if the R300 will also support the L5420 2.50Ghz...
View ArticleR710 Memory population with SR and DR
Hello.I have R710 with two E5530 CPUs and DIMMs:4x2Gb DR8x2Gb SRhow to populate it correct?now I have wrong config witha1-a2 + b1-b2 - DRa3-a6+b3-b6 - SRThanks a lot
View ArticleDell Poweredge T20 Xeon BSOD
my dell poweredge t20 is having a BSOD for Clock watchdog timeout after the most recent updates including bios i have a funny feeling its the newest bios since i have disabled c states, removed the...
View ArticleMemory Upgrade Poweredge R710 2 x 4GB 1 x 8GB per cpu?
Hello, I'm trying to upgrade the Ram in a Poweredge R710 server.It currently has 6 x 4GB sticks (3 sticks for each CPU, located in slots A1,2,3 and B1, 2, 3.I need to upgrade this to 32GB of RAM to...
View ArticleProblem with RAM and Graphics Card
Hi all!Today I got a PowerEdge T310 from a friend of mine that used it as a Server, inside it has a Xeon X3430, 4 GB of RAM and a pair of 250 GB HDDs and I thought that I could use it as a daily driver...
View ArticleWhat is main difference between Linux hosting and Windows hosting?
What is main difference between Linux hosting and Windows hosting? Please let me know What is main difference between Linux hosting and Windows hosting?
View ArticlePowerEdge R630 riser card PN for 2xCPU configuration
Hi,Can you please provide me with the part number for PowerEdge R630 riser card supporting dual CPU configuration?Thanks in advance!
View ArticlePowerEdge 6800 Windows Server 2008 R2 drivers
after installing Windows Server 2008 R2 everything runs smoothly and it seems windows has already all drivers. but.. i wanna be sure i got all possible performance of the machine. device manager shows...
View ArticleWere the rear case fans on the R900 optional?
We have an R900 that thinks the rear fans have failed. I've never know this server to have rear fans.If they are optional, how to I turn off monitoring for these fans?
View ArticleReplacing Drive on PowerEdge 840.
I had a drive go offline, then online by itself. The controller rebuilt it. Just to be safe, I have bought a Western Digital replacement. Do I take it "Offline" in OpenManage before pulling it?
View ArticleInstall windows server 2012 on Poweredge 1950
I have try to install Win server 2012 on a Poweredge 1950 creating a bootable USB and a DVD but either way is not working, I have follow several web options like setup boot process for USB and to boot...
View ArticlePowerEdge VRTX convert from Tower mode to Rack mode instructions
Enclosure Owners Manual only shows conversion for left front and right front ears. Does not show conversion for left rear and right rear? How does the rear of the VRTX attach to the rack?
View ArticleVRTX tower mode to rack mode?
need complete instructions for converting VRTX server from tower mode to rack mode?
View Article