Hi Al,
I was wondering if there is some standard thought about how the nics are connected to the switches in a M1000/PE1955
I have 2 swiched on Slot 1 and 2 and a pass-through module in Slot 3.
It seems that servers shows 4 nics where:
Eth0 = Slot-3
Eth1 = Uknown
Eth2 = Slot-1
Eth3 = Slot-2
Does a server always shows 4 nics and do I need to get my Mac-addresses from the switch-mac-table before installing ?
I hope there is a more simple way to do this.
Cheers,
Matt