DELL M620 Issue on boot Message ID : VLT0204

Hi,

One of our blade m620 when connected on the chasse m1000e, after booting idrac gave us errors on log.

I get 3 times this message:
VLT0222 -The PERC1 PG voltage is outside of range.

Then i got this:
VLT0204 -The system board fail-safe voltage is outside of range.

And the blade goes power off.

I've made a racreset and also restart all system, and made reseat the cards on the blade, and still got this errors.

PowerEdge M620

Integrated Dell Remote Access Controller - 1.66.65

BIOS - 2.4.3