This discussion is about add-on video graphics cards that work with Dell PowerEdge T110 (plain T110, not the T110 II).
An ASUS EAH5450 SILENT/DI/1GD3(LP) video card was recently installed in a PowerEdge T110 with the following specifications:
CPU: Intel Xeon X3430 @ 2.4GHz
RAM: 4GB
RAID CONTROLLER: Dell PERC 6i/R SAS
One downside of this card is it only has 1GB of DDR3 RAM.
The next post will cover a VisionTek 900356 with 2GB of DDR3 RAM.
The following steps were performed to enable the ASUS EAH5450 graphics card
1. Power off and unplug computer
2. Insert ASUS EAH5450 into PCIe x16 slot
3. Leave video cable connected to onboard VGA connector
4. Power on computer
5. Enter BIOS and change
"Integrated Devices > Embedded Video Controller" from "Enabled" to "Disabled"
6. Reboot computer
7. Move video cable from onboard VGA connector to ASUS EAH5450 connector
Below are photos of the ASUS EAH5450
Text written on the card:
EAH5450 043576-01138 YV00J2-S32 326106
EAH5450 SILENT/DI/1GD3(LP)
CBCOYZ433665
CO27PML2
REV. 1.02
08003-00260*00