Hi ,
We are trying to figure out some unexpected behaviour.
On an M620 blade, we loaded RedHat.
The default System Bios settings were used....Internal SD Card ON, 1st boot device SD card.
After loading RedHat, we could see all the disks, SAN storage etc and all seemed fine.
Then it was decided to turn off the SD card (Integrated Devices/Internal SD Card Port/OFF)
And the 1st boot device was changed to the Perc controller
When we rebooted there was "No Operating System Found".
So, did we unknowingly install Redhat on to the SD card, because the default setting had it as a priority over the Perc controller?
Cheers,
John Bradshaw