Hi all,
we have a PowerEdge R510, current BIOS version is 1.5.3, BIOS version when it was purchased. After a reboot we had problems to get it up, it was stucked at boot BIOS (didn't take note of the error that was shown). Due to the fact that it was used in a facility where there was a lot of dust, and since there where dust in the inside, I disassembled all it and removed such dust. Once this operation was completed and reasseembled the server it went up with no problem, I took profit to take data backup with an USB 3.0 external HD.
Due to a UPS problem (batteries were dead), we suffered an uncontrolled electric power down and the server went shutdown. Now when we try to boot the server it is stuck on BIOS going up. The screen shows (after configuring memory message) DELL logo, running bar stopped at 20-25% and the error that it's shown are leds 2,3 and 4 with fixed light (ther is no LCD, it's a 12 HD slots), USB error.
I have tried to disassemble all it with the idea to boot it up and update firmaware in first place, but there is no way. From manual information I have tried to reset it through CLEAR jumper, removed motherboard battery, etc, but I cannot find how to get it up.
I have search through manuals, internet and forums if someone dealed with this problem and found a solution but with no luck. Can anyone give me a clue to solve it.
Thanks for your time and appreciated your help.
Angel