Hi,
We have a blade server m1000e with 8 m610, 6 m620 and 2 M630.
2 m630 have this configuration :
2x cpu Intel Xeon E5 2698v3 (2x 16cores)
196GB Ram
This 2 m630 are new, (they are installed since 2 days) and since they are installed, fan speed has increase.
Actual we have this stats :
FanSpeed 1 | Fan-1 OK | 8226 rpm
FanSpeed 2 | Fan-2 OK | 11284 rpm
FanSpeed 3 | Fan-3 OK | 11330 rpm
FanSpeed 4 | Fan-4 OK | 8182 rpm
FanSpeed 5 | Fan-5 OK | 11300 rpm
FanSpeed 6 | Fan-6 OK | 11287 rpm
FanSpeed 7 | Fan-7 OK | 8167 rpm
FanSpeed 8 | Fan-8 OK | 11265 rpm
FanSpeed 9 | Fan-9 OK | 11317 rpm
[Ambient Temperature Fan Request %]
38
[Server Module Fan Request Table]
<Slot#> <Server Name> <Blade Type> <Power State> <Presence> <Fan Request%>
1 srv1 PowerEdgeM610 ON Present 53
2 srv2 PowerEdgeM610 ON Present 52
3 srv3 PowerEdgeM610 ON Present 52
4 srv4 PowerEdgeM610 ON Present 52
5 srv5 PowerEdgeM610 ON Present 51
6 srv6 PowerEdgeM610 ON Present 52
7 srv7 PowerEdgeM610 ON Present 52
8 srv8 PowerEdge M630 ON Present 63
9 srv9 PowerEdge M620 ON Present 39
10 srv10 PowerEdge M620 ON Present 38
11 srv11 PowerEdge M630 ON Present 76
12 srv12 PowerEdgeM610 ON Present 51
13 srv13 PowerEdge M620 ON Present 38
14 srv14 PowerEdge M620 ON Present 38
15 srv15 PowerEdge M620 ON Present 39
16 srv16 PowerEdge M620 ON Present 38
[Switch Module Fan Request Table]
<IO> <Name> <Type> <Presence> <Fan Request%>
Switch-1 Cisco Catalyst WS-CBS3130G-S Gigabit Ethernet Present 30
Switch-2 Cisco Catalyst WS-CBS3130G-S Gigabit Ethernet Present 30
Switch-3 M8024-k 10GbE SW 10 GbE KR Present 30
Switch-4 M8024-k 10GbE SW 10 GbE KR Present 30
Switch-5 Cisco Catalyst WS-CBS3130G-S Gigabit Ethernet Present 30
Switch-6 Cisco Catalyst WS-CBS3130G-S Gigabit Ethernet Present 30
[Enhanced Cooling Mode]
Enhanced Cooling Mode(ECM) Status = Disabled.
We have update cmc to 5.00 for idrac 8.
I verify on the 3 new m630 and all sensors are ok.
Do you think this fan speed are normal?
This Fan speed is normally?