My M1000 system has two MXL (A1/B1) and 2 M I/O Aggregator (A2/B2). Nothing is in C1/C2.
My CMC reports A1/A2/B1/B2 are '10 GbE KR' which I believe is correct.
I have just installed some 10G cards 06ycp8 (which i believe to be Broadcom 57810s KR). Those blades will not come up, citing a fabric mismatch.
If i run getdcinfo, I get this. I'm not sure what 'PCIe bypass gen 2' means, but those 4 slots are the ones that do not work.
Can someone suggest what i must do? is the issue slot 3 & 5 (which are working, but only @ 1Gbps)? is the issue the new cards I have bought are not correct? There's very little documentation I can find, so pointing me @ it would be helpful. I understand these new cards to be KR, am I wrong?
Group A I/O Type : 10 GbE KR Group B I/O Type : 10 GbE KR Group C I/O Type : Gigabit Ethernet IO# Type State Role switch-1 10 GbE KR OK Master switch-2 10 GbE KR OK Standalone switch-3 10 GbE KR OK Master switch-4 10 GbE KR OK Standalone switch-5 None N/A N/A switch-6 None N/A N/A Server# Presence DC1 Type DC1 State DC2 Type DC2 State server-1 Present Gigabit Ethernet OK None N/A server-2 Present 10 GbE XAUI+KR OK None N/A server-3 Present 10 GbE XAUI OK Gigabit Ethernet OK server-4 Present 10 GbE XAUI+KR OK None N/A server-5 Present 10 GbE XAUI OK Gigabit Ethernet OK server-6 Present PCIe bypass gen 2 Invalid None N/A server-7 Present 10 GbE KR OK None N/A server-8 Present PCIe bypass gen 2 Invalid None N/A server-9 Present PCIe bypass gen 2 Invalid None N/A server-10 Present PCIe bypass gen 2 Invalid None N/A