Hi,
I have a PowerEdge R300server and the following warnings:
PS 1 Status: Power Supply sensor for PS 1, predictive failure was asserted
PS 2 Status: Power Supply sensor for PS 2, predictive failure was asserted
- I have updated OMSA to 5.5 (RedHat 4.7), DRAC5 firmware to 1.60 and BMC firmware to 2.50.
- I have swapped both units, also checked the system with one PSU at a time
- I measured voltage (with open chassis) - stable 3.3V, 12.2V and 15.1V during during booting, powering off or normal work
- I checked if there is any damage inside one of the PSUs and there is none
What else could I check to make sure that the PSUs are faulty (or not)?
Cheers,
Daniel Andrzejewski