I am trying to get a 2800, A07 firmware, to boot from a PCI Express SATA controller card which has an SSD attached to it. The card shows up on BIOS boot with the disk drive. On the BIOS set up page under Hard-Disk Drive Sequence the card shows up at *Slot 3 Adapters with no ID support. The second entry is System BIOS boot devices. However, on the BIOS setup fro the Boot Sequence there is no option to boot from Drive C. All that is shown are the IDE CD-ROM and the Diskette Drive A.
What can be done to have Drive C show up on the Boot Sequence set up option?