Hello PowerEdge General HW Forum:
My C1100 is in a solid fault condition. When power is applied by plugging it in, power comes on but the system is unresponsive. The power switch on the front panel is non functional. The orange/amber fault light is on solid and the blue system ID light is on solid on the front panel. The BMC does not attempt to boot nor the system. I have gone thru the trouble shooting steps listed in the owner's manual to eliminate all hardware items except for the system board which I do not have a spare of presently. Any ideas? System consists of standard C1100 with four available SATA 2 hdd slots with one filled, 2 Xeon processors and 72 gig (18x4mg) ram. During the last inspection of the system with BMC everything (fans, temperatures, voltages etc.) appeared to be nominal. Thanks for any feedback!
lnelson15