Hi,
I have a problem with new mezzanine cards BROADCOM 10GbE 2P 57810S-k.
they wont work on 10g speed they only work on 1g.
I have updated the firmware to first 7.2.14 and then to 7.2.20, but still nothing.
The operating systems are Oracle Linux 6.3 on one server and Opensuse 12.1 on the other server.
I have tried the Opensuse 12.2 also and different Kernels on all linux-es.
I even tried forcing it on 10g:
In Linux I tried the following
ethtool -s p3p1 speed 10000 duplex full autoneg off
ethtool -s p3p1 speed 10000 duplex full autoneg off
on switches I tried:
console(config-if-Te1/0/9)#speed 10000
Auto-negotiation has been disabled. Auto-negotiation should be enabled for
copper ports at any speed and is required for copper ports running at 1G or
higher speeds per IEEE 802.3.Auto-negotiation must be disabled on fiber
ports.
Fiber ports must be configured for full duplex.
After that ssh was stopped and I couldn`t ping the server anymore.
Thank you in advance for your help.
Marko.